Features of cable stripping machine
1.Multifunctional wire & cable stripper is driven by single or three phase motor. High efficiency, low noise.
2.Two adjusting handles to change the distance between knives to process different diameter wires.
3.Gearbox and electric motor is equipped with start and stop button which can ensure safe operation.
4.Easy operation, simple knife change, low cost and no pollution
5.TFseries wire stripping machine can strip single-core and double-core flat wires at one time.
6.The copper wires stripped by wire stripper machine is still entire, easy to store.
Application of cable stripper:
The cable strippers are widely used in recycling companies, automobile dismantling plants, smelting and casting industry to cut scrap metal, scrap steel, scrap copper pipe and steel pipe and so on into qualified furnaces.
Specifications of cable strippers:
Structure of Wire cable stripper:
TF-A2 and TF-A4 cable stripping machines are both designed with double rollers and blades structure.
On TF-A4 cable stripper, there are two holes for flat wires.
Maintenance of cable strippers:
1) This machine is suitable for various kinds of round cables and sheath flat cables.
2) The operating methods are similar operated by both manual and electrical, no matter which way, operators have to check the size of cables and feed channel to make sure they are applicable before operation.
3) In case wire broken after stripping ,please follow the solutions as below:
• Adjust the tightness of the spring both sides of the screw rod.
• Check whether the feeding holes are misplaced.
• If the stripping blades is too sharp ,use oil stone to grind a bit.
• Lubricating suitable engine oil on the surface of adjusting screws and slider to prevent locking and reduce noise.
Quality Control of wire stripping machine:
1).Before the order can be confirmed finally,we would strictly check the material ,accessories of the sample step by step.
2).We salesman ,also as a order follower,would trace every phase of production from the beginning.
3).We have a QC team ,every product would be checked by them before packed.
4).We would try our best to help clients solve problems when they occurred.
5).Most of our products have passed TUV CE /GS ISO9001 certificate.