Categories

Hot Products

Aquatic Livestock Feed Pellet Mill

Fish Shrimp Feed Pellet Mill

1. Fish shrimp feed pellet mill adopt imported SKF or NSK bearings, Simens motor or China famous motor available.
2. with magnet and over load protection system,protect machine well.
3. Conditioners and ring die both adopt stainless steel, durable.
4. Equip ring die lift device.

Introduction:

Fish shrimp feed pellet mill is the specialized feed processing machinery which is pressing the crushed corn, soybean meal, straw, grass, rice husk or other raw material to pellets directly.

Because the Fish shrimp feed pellet mill has the features of high conversion rate, good fattening effect, low sick rate, convenient to maintain, shorten cycle of slaughter etc, so the feed Pellet Making Machine/Feed Mill Pellet Mill is widely used in Large, medium, small aquaculture plant or feed mill, livestock farms, Poultry farms, Individual farmers,etc.


Main Features for Fish shrimp feed pellet mill:

1) Stainless steel ring die resists corrosion, has long service life and guarantee high quality pellets.

2) High quality gearbox of this SZLH508 Fish shrimp feed pellet mill can adjust the speed timely, avoid blockage.

3) Driven by high precision gear which ensures high productivity and low energy-consumption.

4) Adopt lubricating system, which automatically lubricates each main bearing and oil seal, thus improve the machine reliability and service life.

5) Permanent magnet device of SZLH508 Fish shrimp feed pellet mill can remove impurities in the pelletizing process.

6) Convenient maintenance and operation for the SZLH508 Fish shrimp feed pellet mill.



Specifications:


Type

Model

Main Power(kw)

Capacity(t/h)

Ring die(mm)

Feed Pellet Mill

SZLH320

37

2~5

320

SZLH350

55

3~8

350

SZLH400

75/90

2~10

400

SZLH420

90/110

3~12

420

SZLH508

132/160

4~20

508



Working process:

Our SZLH508 Fish shrimp feed pellet mill is very easy to operate and maintain, you can directly use it upon you get it,  as long as connecting with the electric power.

Because all of our machines had run once as a trial before the delivery, to make sure everything goes well, so you can be assured about the quality of our machines.

Firstly, the raw material is delivered into the SZLH508 Fish shrimp feed pellet mill through a conveyor and then conveyed into a rotating ring die by a feeder.

Secondly, the pulverized material will be pressed into the ring die through two rotating press rollers. The resulting pressure compresses the material and extrudes it through the holes in the die. Then, the pellet will be out directly.

Finally, you can cool the final pellets down in the sun, or with a cooling machine and drying machine, then you can pack them to store or sell.




Why choosing JLNE?

Why choose us?

1.over 10years experience on fish shrimp pellet making mill and complete line

2.professoinal sales and engineers team design according to your need for fish pellet making machine.

3.high quality as all of our machines been approved CE certification

4.already supplied over 100 turn-key projects with great satisfaction.

5.we are manufacturer of Fish pellet making machine,customers can get better offer and directly after-sales service.


FAQ:

1) Can I visit your factory and clients' workshop? How to get to your factory?

Yes, welcome to visit our factory anytime, we can also arrange your visit in our China clients' workshop. For getting to our factory, you can get a flight to Nanjing Airport. It just takes about 1 hour from Nanjing Airport to our factory by car.

2) What is your guarantee time and aftersale service for fish pellet making machine?

--Our guarantee time is 2 years.

--Each order machine we provide installation drawing&operation manual. If needed, engineers can be sent to your factory for installation and commissioning, training.

--Any problem in operation or others about Fish pellet making machine, we will give solution in 24-48 hours.

3) What is your payment term for Fish pellet making machine?

We can accept various payment terms if it is convenient for you.

4) What is your delivery time for Fish pellet making machine?

Fish pellet making machine leadtime is 7 working days in standard specification, 15~20 working days if customized.

5) What is the material of the ring die mould and roller?

We have two kinds of material: stainless steel and alloy steel. But it is better to use alloy steel material because of its high hardness and long using life to make wood pellets.

6) The oil lubricating system is automatic or semi-automatic?

Generally, the fish shrimp feed pellet mill is with semi-automatic oil lubricating system. And it also can be with automatic type according to your request.


Hot Tags: fish shrimp feed pellet mill, suppliers, manufacturers, factory, buy, price, for sale
  • QR CODE
  • facebook