Chicken Feed Pellet Mill is an ideal pelletizing machine for high quality poultry feed pellets. Before pelletizing, grains such as corn, wheat, rice and soybean etc. need to be crushed into powder. Also they should be mixed throughly with a mixer since other additives may be added to ensure a balanced feed formulation. The finished feed pellets have a smooth surface and easy to digest for animals. Therefore ring die feed pellet mill is widely adopted by livestock farm, poultry farm, feed processing industry and aquaculture.
Features of Chicken Feed Pellet Mill:
1. Main drive adopts high accurate gear drive with higher efficiency, steady running and low noise
2. Feeder is made of stainless steel with anti-lump structure and adopts the frequency or electromagnetic speed regulating control to guarantee quality pellet feed.
3. Stainless steel conditioner can be customer-made to control cooking time. Special seal is adopted in two ends of the conditioner, steam is injected in the conditioner directly, so that it can fully contact the material inside.
4. The body part of the Chicken Feed Pellet Mill is cast in special technology with high accuracy. Advanced flexible coupling connects the motor and gear box with big compensation and steady driving.
Feed Pellet Mill
1) How did you define your Chicken Feed Pellet Mill model as 350 /420 / 508, etc.
The model is defined based on the diameter of the ring die mould.For example, mould 350 means that the diameter of the ring die is 350 mm.
2) If we only buy one set of 5 ton per hour Chicken Feed Pellet Mill , could we produce feed for different kind of animal and poultry.
Yes. of course.
What we need to do is just have different size of ring die mould according to the requirement of different animal and poultry. and the replacement of the ring die mould is very easy.
3) Is it possible that we only buy one set of 5 ton per hour Chicken Feed Pellet Mill to produce animal feed without other equipment
Yes, It's possible.
but you'd better find the proper way to load and mix the raw material. otherwise, you will have to do such jobs by hands.
4) What is the suitable moisture (water content) of the raw material that easy to make feed pellet the ideal moisture range is from 15% to 18% .
5) What is your aftersale service?
--Our guarantee time is 2 years.
--Each order feed pellet mill we provide installation drawing&pellet mill operation manual. If needed, engineers can be sent to your factory for installation and commissioning, training.
--Any problem in operation or others about machines, we will give solution in 24-48 hours.
6) How to get to your factory?
You can get a flight to Nanjing Airport. It just takes about 1 hour from Nanjing Airport to our factory by car.
7)What is your payment term?
We can accept various payment terms if it is convenient for you.