Features of Waste radiator recycling plant:
1.This scrap radiator recycling plant is consisted of crusher, shredder, conveyor, separator and dust collector. First crusher of the line can also be used for crushing scrap copper wires and other kind of metals.
2.Normal radiator from air conditioner and car can be processed by this line, and compressed radiator can be also recycled. No limit about the radiator size.
3.Output copper pieces and aluminum pieces can be reused. Also the output piece size can be adjusted as customers' requirement.
4.The whole separating line for radiator is controlled by PLC controller. Only two workers required to operate the equipment.
5.All of the equipment and spare part are with high quality and has long use life. We will also supply necessary equipment to help customer maintain the complete plant.
6.The first crusher designed by double roller and have the advantage of low noise, big crusher chamber and etc.
7.The cutter of first crusher use the special tool steel and the crushing range is wide. Both have splitting, tearing, squeezing and any other features
8.Magnetic separator using the ferromagnetic roller separator and the separator rate can reach up to 95%.
9.The pulse dust collector can prevent the leak of dust and the dust-cleaning rate can reach 99%, have no secondary pollution.Separated by the air flow separator and the separation rate can reach 97%.
Application of Radiator separating plant:
The radiator recycling plant is used for crushing and separating all kind of air conditioner and car water tank radiator with aluminum fins. Both straight and compressed radiators can be processed by this recycle plant.
Main components of Scrap radiator separator:
1.Conveyor:Put radiators on the conveyor and send them to first crusher.
2.First crusher: This crusher cut the radiator to small pieces with size of 10-15cm
3.Second shredder: The shredder cut the crushed radiator to final small pieces.
4.Separator: Copper pellet and aluminum pellet get out of this vibrating separator.
Specifications of Industrial radiator separating machine:
Voltage / Power
380V / 118.3KW
Working process of Radiator recycling line:
Put the material (waste radiator, water tank) to the first crusher for the pre-crush and the crushed material conveying by the conveyor to the second grinder. Then to suck out the magnetic material (iron) which on the conveyor via the single roller type magnetic separator for the pre-separation. The material after pre-separation will into the air flow separator for the second separation and separate the copper and aluminum. The whole production line is controlled by negative pressure and equipped with the pulse dust catcher to solve the dust problem. The dust cleaning rate is reach up to 99.9%
Q:How many pieces blades inside first crusher? And how long is the use life?
A:40pcs blades. Uselife: 3-5 years
Q:How many blades inside the second crusher? Uselife?
A:14pcs. Uselife: 1-2 years
Q:How to maintain the blades?
A:We have blade sharpener machine.
You can sharping the blades after use it for time.
Q:How often to sharping the blades?
A: Normally every 15 days. ( 10 working hours each day)