Categories

Hot Products

Radiator Separator

Scrap Aluminum Copper Radiator Separating Machine

The separator machine is used to cut radiators from air conditioners and separate copper pipes from aluminum. Before processed by this machine, the radiators shall be cut with a band saw into pieces of certain width.When radiators are more than 2 layers, a band saw is needed to cut them into one layer or two layers.
Send Inquiry

Application of Aluminum copper radiator separator: 

Automatic Small scrap radiator fin copper tube aluminum strip cutting separator machine  can strip and separate copper from aluminium in waste air condition radiator, waste water tank directly, easy to operate



Features of Radiator recycling machine:

TF-16 waste radiator separator is an environment-friendly equipment,used for separating copper pipes from aluminum,Designed and manufactured  by us ,this machine is a newly-designed compact one ,taking up small area. Little materials will be lost during processing , so this machine is practical and economical.


Advantages of Radiator recycling machine:  

1. Humanized design, easy to operate.

2. High efficiency, separation within seconds. 

3. Labor saving, use automatic recycling instead of labor working. 

4. No damage to copper pipes, no copper loss, practical and economical.


Specifications of Radiator recycling machine:

Capacity: 3000-4000kg/day

Motor: 3kw (One Set) + 4kw (One Set) 

Speed Reducer: 2 Sets

Voltage: 380v or Customized 

Frequency: 50Hz/60Hz 

Triangle belt: A Type (1200mm); B Type (1200mm)

Center distance of two copper pipes in radiators shall be 19mm or 21mm or 25mm. 

G.W./N.W.:650/600KG    PACKING SIZE:1.8*0.95*1.3  OUTPUT:3T(8HOURS)


Working procedure of Radiator separator:  

1. Turn the Reversing Switch and check the rotating direction.

2. Inject oil into the two oil holes in the left and right side of the machine to lubricate transmission gears (normally once per 4 working hours).

3. Push different radiators into different Material Inlets according to their specs (19mm, 21mm, 25mm); the left side of radiators must touch the left side of Material Inlets; or, the right side of radiators must touch the right side of Material Inlets (the first copper pipe in the Lower Layer shall be nearer to the Guiding Ruler, different with 5.6); when radiators are pushed into Material Inlets, Feeding Gears will gnaw at radiators and take them into the machine.

4. After radiators are taken into the machine, copper pipes and aluminum are separated and come out of the machine automatically.

5. According to the layers of radiators and their height, adjust each pair of Adjusting Wheels on the machine (after adjusting, tighten screws below).



We also supply Complete Recycling Line for Compressed radiator. 

Please Click following Link to get more information: 


TF-500: capacity(1000-1200kg/h)


FAQ: 

Q:What’s the spare parts of the separator? 

A: Spare parts of the separator are blades and belt, we will supply extra parts according to customers’ requirement. 

Q:What’s the warranty time for the equipment? 

A: 12 months. During the warranty period, if there is any problem due to quality,we will supply spare parts for free, and customers take charge of delivery cost. 

Q:What’s ordinary delivery time of the separating machine? 

A: Within 12 working days. 


Hot Tags: scrap aluminum copper radiator separating machine, suppliers, manufacturers, factory, buy, price, for sale
  • QR CODE
  • facebook